Factory Sell Lithium Hydroxide Anhydrous CAS 1310-65-2

• CAS No.: 1310-65-2
• Formula: Lioh
• EINECS: 215-183-4
• Type: Synthesis Material Intermediates
• Appearance: Powder
• Quality: Industrial
• Model NO.: Qinmu100
• Colour: White
• Mf: 1310-65-2
• MW: 23.95
• Melting Point: 470 °c
• Boiling Point: 925°c
• Density: 1.43
• Transport Package: 25kg/Drum
• Specification: 99%
• Trademark: Qinmu
• Origin: China
• Production Capacity: 20000

Product Description

Product name:Lithium hydroxide
CAS No:1310-65-2
Synonyms:
"Lithiumhydroxide,anhydrous/99%";Lithiumhydroxide,99%[anhydrous];LithiumHydroxideAnhydrous[forGeneralOrganicChemistry];LithiuMhydroxide,anhyChemicalbookdrous,pure,98%500GR;LITHIUMHYDROXIDE98+100G;LITHIUMHYDROXIDE98+1KG;Lithiumhydroxidepowder,reagentgrade,>=98%;Lithiumhydroxidereagentgrade,98%

Lithium hydroxide introduction:
Lithium hydroxide is one of the most important lithium compounds, including anhydrous LiOH and LiOH · H2O. Anhydrous LiOH is white tetragonal crystalline particles or mobile powder, with relative density of 1.45g/cm3, melting point of 471.2 ºC and boiling point of 1620 ºC. Lithium hydroxide monohydrate is a white single crystal powder that is easy to deliquescence. The phase chemical book has a density of 1.51g/cm3 and a melting point of 680 ºC. When the temperature is higher than 100 ºC, the crystalline water is lost and becomes anhydrous LiOH. LiOH is soluble in water and slightly soluble in alcohol. It is easy to absorb CO2 in air to form Li2CO3. LiOH and its concentrated solution are corrosive and can corrode glass and ceramics at general temperature.

Application:
It can be used as lubricating grease additive (thickener, anti oxidant, extreme pressure agent), which can improve heat resistance, water resistance, stability and mechanical properties, can be used for bearings of automobiles, airplanes, cranes, etc., and can be used as electrolyte raw material of lithium batteries.

More details:

Item	Specifications(%)
LiOH	56.5-57.5
Na	≤0.010
K	≤0.005
Si	≤0.005
Cu	≤0.0007
Mg	≤0.010
Mn	≤0.010
Ca	≤0.010
B	≤0.010
Cl	≤0.002
SO4	≤0.010
CO2	≤0.5
Hydrochloric acid insoluble matter	≤0.005

Lithium hydroxide package:
1kg/bag ,25kg/drum or according requirements. product,and clear&firm mark in every bag.including trademark,name,model, lot number,net weight,manufacturer ect...

Lithium hydroxide storage:
It should be placed indoor where is dry& well-ventilated, room temperature is 5-30ºC, Stored in batches. do not near the power,prevent humid, avoid sun exposure.strictly prohibit storage with volatile chemicals to prevent adsorption modification.

Lithium hydroxide shipping:
Delivery as common product. when transport KP line products shuld use clear conveyance and avoidmoisture,rain,sun and carry gentlyto prevent smash package.